LED Grow Light

ROHE 1000W HLED Hybrid Grow Light: LED, HPS and Far-Red for Greenhouses

ROHE 1000W HLED Hybrid Grow Light: LED, HPS and Far-Red for Greenhouses

  • Friday, 30 October 2026
  • 0
  • 89
  • 0

ROHE · Commercial Greenhouse Lighting

LED, HPS and Far-Red for Greenhouse Lighting

Greenhouse supplemental lighting needs to work alongside changing daylight, crop schedules and maintenance routines. The ROHE 1000W HLED Grow Light brings three independently dimmable light sources into one fixture: 560W LED main lighting, 400W high-pressure sodium (HPS) and 40W far-red. For growers evaluating hybrid greenhouse lighting, it offers a practical way to adjust the contribution of each source within a single installation.

Total Input Power
1000W
LED Main
560W
HPS Lamp
400W
Far-Red
40W
ROHE 1000W HLED hybrid greenhouse grow light showing two bulb forms
Two bulb forms shown with the HLED hybrid fixture.

At a glance: Independent three-channel 0–10V dimming, a bulb-forward open structure, passive cooling and IP65 protection. Specified fixture inputs are 208V, 240V and 277V. The fixture carries a five-year warranty; the HPS bulb carries a separate one-year warranty.

How the Hybrid Light Engine Works

The HLED architecture combines LED panels with a central HPS lamp and a dedicated far-red channel. Rather than requiring separate fixtures for each source, this LED and HPS hybrid grow light integrates them into one assembly while preserving independent control.

  • 560W LED main channel: Provides the main LED contribution to the combined light output.
  • 400W HPS channel: Adds a separately controlled high-pressure sodium light source to the hybrid configuration.
  • 40W far-red channel: Lets growers adjust the far-red contribution separately from LED main lighting and HPS.

This configuration is intended for commercial greenhouse supplemental lighting. When selecting a lighting system, evaluate the combined spectrum and canopy distribution alongside the total input power, crop requirements and greenhouse layout.

Independent 0–10V Control for Three Light Sources

The LED, HPS and far-red channels each support independent 0–10V dimming. Growers can adjust their relative contributions instead of changing all three sources together through one shared setting.

For a greenhouse project, this provides flexibility when developing lighting settings for different cultivation stages and supplemental-lighting periods. Define the desired channel settings around the crop, available daylight and lighting schedule, then confirm the control wiring and controller interface for the intended installation.

ROHE HLED independent LED HPS and far-red dimming with combined spectrum chart
Independent LED, HPS and far-red control with the combined-spectrum chart.

An Open Structure for Practical Maintenance

The bulb-forward design positions the HPS lamp in the open central area of the fixture. This reduces frame obstruction around the lamp and provides access for cleaning and maintenance. LED panels sit on either side of the central lamp.

The HLED uses passive thermal management and has an IP65 protection rating. Its specified ambient operating range is −20°C to 40°C, giving project planners a defined temperature range to check against greenhouse conditions.

ROHE HLED bulb-forward open structure and original fixture render
Bulb-forward structure with access around the central HPS lamp.

Reading the PPFD Comparison at a 4 ft Test Height

The HLED specification sheet includes three PPFD maps at a 4 ft test height: LED-only, HPS-only and combined LED + HPS operation. The combined map shows a peak reading of 1207.

Compare the complete measurement pattern, including the center and edge readings, when reviewing the fixture. The peak is one point in the map; it does not describe the average across an entire crop area. The 4 ft label identifies the test height, so fixture spacing and project coverage should be evaluated against the actual greenhouse layout.

ROHE HLED LED-only HPS-only and LED plus HPS PPFD maps at 4 ft height
Specification-sheet comparison at a 4 ft test height: LED-only, HPS-only and LED + HPS. Combined-mode peak reading: 1207.

For a broader explanation of lighting measurements, read our guide to PAR, PPFD and DLI. It introduces the terms growers use when discussing light intensity and daily light delivery.

Technical Specifications

Parameter Specification
Brand ROHE
Product ROHE 1000W HLED Grow Light
Total input power 1000W
Power configuration 560W LED main + 400W HPS + 40W far-red
Dimming Independent 0–10V control for LED, HPS and far-red
Specified input voltages 208V / 240V / 277V
Specified input currents 5A at 208V / 4.4A at 240V / 3.8A at 277V
Frequency 50/60Hz
Power factor >0.95
Thermal management Passive cooling
Ingress protection IP65
Ambient operating temperature −20°C to 40°C
Product weight 14.9kg
Fixture warranty 5 years
HPS bulb warranty 1 year

Plan Around the Whole Greenhouse

A useful lighting brief connects crop requirements with greenhouse dimensions, mounting height, available input voltage and the intended control setup. Share those details with ROHE when evaluating the HLED configuration and requesting a commercial quotation.

Frequently Asked Questions

What is an HLED hybrid grow light?

The ROHE HLED integrates LED main lighting, an HPS lamp and a far-red channel in one fixture. The specified power configuration is 560W LED + 400W HPS + 40W far-red, totaling 1000W.

Can LED, HPS and far-red be dimmed separately?

Yes. Each of the three channels supports independent 0–10V dimming.

Which input voltages are specified?

The fixture specification lists 208V, 240V and 277V inputs at 50/60Hz. Confirm the required supply configuration when ordering.

Does the five-year warranty include the HPS bulb?

The fixture warranty is five years. The HPS bulb has a separate one-year warranty.

What should I provide when requesting a quotation?

Send your crop type, greenhouse dimensions, available mounting height, input voltage, preferred bulb form, required quantity and destination country. Include any requirements for the lighting control interface.

Discuss Your Greenhouse Lighting Project

Considering a hybrid LED and HPS grow light for your greenhouse? Contact ROHE for the HLED specification sheet and a commercial quotation based on your project requirements.

Request HLED Details on WhatsApp

Explore more ROHE horticultural lighting solutions.

0users like this.

Leave a Reply

RSS

Get in touch

Refresh Code